Wood from Central and South America and Asia
Affordable Decking Delivered Direct to You

Hardwood Deck Building Accessories

DeckWise® Accessories for Hardwood Decking

DeckWise logoHardwood Decking Supply Is An Authorized Dealer of DeckWise® Products

DeckWise® budget-friendly products are designed for ease of use and dependability on the job site, ultimately resulting in decreased labor time, increased building efficiency by at least 30%, and beautiful, longer-lasting decks.

175 - Pack Extreme4 Ipe Clip Brown Hidden Deck Fastener Kit for Hardwoods

With it's built in 5/32 inch gap spacer leg, installing the EXTREME4 Ipe Clip hidden deck fastener clip is simple. contractors and DIY home-owners are given a high end hardwood decking surface that is free of face screws. In order to attach hardwood decking boards, the EXTREME4 fasteners utilize an edge-mount system. These are crafted with a hardened stainless steel insert coated in black oxide. Deck screws are installed at 45 degrees through the fastener, down into the joist.

Kit includes: 175-fasteners; 190-deck screws; 12-tapered Ipe 3/8 in. wood plugs; 3-deck spacers; 1-high speed 1/8 in. drill bit; 1-T15 star driver tip, 1-instruction sheet and fastens 100 sq. ft. of decking.


525 - Pack Extreme4 Ipe Clip Brown Hidden Deck Fastener Kit for Hardwoods

525-Ipe Deck Clips

The Extreme4 Ipe Clip brand hidden deck fastener makes it quick to install your deck, with no face screwing on top of boards.The clip comes with a 5/32 inch spacer leg and is an edge-mount fastening system designed to attach hardwood decking. This hidden deck clip design also aids in camouflage between board gaps.

Pail includes: 525-fasteners; 565-deck screws; 6-deck spacers; 3-high speed 1/8 in. drill bits; 3-T15 star driver tips, 1-instruction sheet and fastens 300 sq. ft. of decking.


1050 - Pack Extreme4 Ipe Clip Brown Hidden Deck Fastener Kit for Hardwoods

1050-Ipe Deck ClipsOur DeckWise Ipe Clips makes deck installation an effortless process, with pre-built 5/32 inch spacer leg for perfect gaps. The EXTREME4 Ipe Clip gives builders and home owners an expertly built deck with no face screwing for a blemish free deck surface. The EXTREME4 deck fastener has a black oxide coated stainless steel insert for extra hold-down properties and is lab tested to have up to 3-times more strength. Attaching the EXTREME4 with deck screws is at a 45 degree angle through the clip; down into the bottom edge groove of the board; and into the deck joist below.

Bucket includes: 1050-fasteners; 1130-deck screws; 6-deck spacers; 5-high speed 1/8 in. drill bits; 5-T15 star driver tips, 1-instruction sheet and fastens 600 sq. ft. of decking.


#8 Stainless Steel Deck Screws For Hardwoods

#8 - 21/2" - (4 x 64mm) The DeckWise® brand of stainless decking screws is a great way to ensure hardwood deck boards stick tight to the joist. As part of the DeckWise® line of deck building products, Colormatch screws give builders and DIY homeowners a reliable way to fasten any brand of decking. DeckWise® Colormatch decking screws are made from high-quality 305 grade stainless steel for optimum performance with hardwoods.

        • Easy installation - T15 Star Drive trim heads
        • Drive with ease - Type 17 auger tips for easy installation
        • Match your choice of decking - Colored head options available

(350) $49.99 (1050) $142.99 (1750) $228.99



GRK #8x2-1/2 Stainless Steel Deck Screws For Hardwoods

GRK Stainless Steel Fastener ScrewsSmallest Head on the Market for a Clean Finish

Recessed Star Drive: Zero stripping, with 6 points of contact
Trim head: for a clean finished look that countersinks itself
W-Cut™: Low torque, smoother drive
ZIP-TIP™: Allows easier penetration in a pre-drill hole
ESR-3201 Approved for structural application
Case Hardened Steel: for high tensile, torque and shear strength
Climatek™ Coating is AC257: code approved for use on exterior hardwood decking as well as composite decking
For interior/exterior use

GRK's Trim™ Head screws are an excellent choice for fine carpentry, decking and more.

(100) $20.00 (560) $100.00 (3500) $600.00

High Speed Drill Bit

Irwin Drill Bit
• Constructed of M-2 high speed steel for the best combination of strength, heat resistance and wear resistance.
• Standard 118 degree point for use in wood, metal and plastic.

• Size: 1/8"

10 Pack - $39.99

Bo-Wrench Deck Straightening Tool

The Bo-wrench® is a deceptively simple-looking tool which is a must have for both professional builders and do-it-yourselfers. The Bo-wrench® operates easily with just one person needed to straighten deck boards.The Bo-wrench® is compatible with any of the natural hardwoods we carry, (Ipe Batu, Cumaru or Tigerwood). Longer length deck boards, above 15' long, sometimes have a tendency to be crooked or bowed and the Bo-Wrench® can help straighten the boards out.

To operate the Bo-wrench®, first step is to slide the tool onto the joist, pull the lever arm, and release. This tool is versatile as you can either push or pull boards into alignment. Plus, when the handle is perpendicular, the tool locks in place, holding the board securely and leaving both hands free to drive nails or screws.


Hardwood Wrench Deck Board Straightening Tool

Hardwood Wrench

What do you do when you have warped boards? Start using the Hardwood Wrench Board Straightening Tool. With just the swing of the handle, this tool features 1,100 lbs. of pushing force. Our board bending tool provides contractors and DIY homeowners the ability to straighten the most warped deck boards from practically any angle. The Hardwood Wrench board bending tool holds the board in place with its self-locking cam for hands-free deck fastening. The joist pins can easily be reversed, flipped, and expanded to bend any warped deck board at practically any angle.


Ipe Oil™ Hardwood Deck Finish and UV Protector

Ipe Oil

Ipe Oil is an oil-based natural wood finishing product. It is specifically formulated to protect and preserve the natural beauty of exterior hardwood decks. Ipe Oil™ Hardwood Deck Finish provides excellent penetration of even the densest hardwoods with minimal raising of the grain. It protects and conditions the wood while maintaining a completely natural appearance. For exceptional results on Ipe, Batu, Tigerwood, Cumaru and other exotic hardwoods, Ipe Oil™ is the best solution.


Ipe Oil applied

Ipe Seal Hardwood Decking End Grain Protectant

Ipe SealIpe Seal™ from DeckWise® is a wax emulsion sealer proven to increase the structural integrity of hardwood decking. Designed to prevent end checking (drying splits) in freshly sawn logs, lumber, turning blanks, and other exposed wood end and face grain. Ipe Seal™ creates a bond that extends the life of each deck board. One quart of end sealer covers approximately 500 ft2 (46 m2) of decking. It is highly recommended that end grain cuts are protected in order to prevent checks and splits. Due to differences in wood species, variety of climatic conditions, and an individual's usage methods; results are NOT guaranteed..

Ipe Seal End Cuts